Equipment Information
Automated Forklift Entryway Sanitizing System
This system is designed to aid in the sanitizing of wheels on forklifts prior to entering and exiting critical control areas, especially where reduced moisture is advantageous. This system has been designed to provide an uninterrupted uniform distribution of sanitizer solution onto the tire tread surface. The application of sanitizer is initiated by automatic signaling from the controller circuitry, causing the pump to dispense approximately 1.0 ounce of sanitizer evenly split to all nozzles. It’s ready to use sanitizer attaches quickly and safely to the system using out patented Safety Feeds™
Manual
Brochure
Video
D.O.T. Approved Portable tanks (IBC's) or Stationary Poly Tanks
When your sanitation needs have grown to the point were drums become to labor intensive to deal with you are faced with this decision. Do we install stationary chemical tanks or do we switch to IBC's.
- Additional Documents:
- Mini bulk vs installed tanks
Manual Forklift Entryway Sanitizing System
This system is designed to aid in the sanitizing of wheels on forklifts prior to entering and exiting critical control areas, especially where reduced moisture is advantageous. This system has been designed to provide an uninterrupted uniform distribution of sanitizer solution onto the tire tread surface. The application of sanitizer is initiated manually by the operator, causing the pump to dispense approximately 1.0 ounce of sanitizer evenly split to all nozzles. It’s ready to use sanitizer attaches quickly and safely to the system using out patented Safety Feeds™
Portable Foaming Cart
This unit draws the premixed solution from the storage tank and provides thick, wet foam that will cling to vertical surfaces. Foam consistency and volume can be easily regulated to provide just the right amount of foam for each application.
Features include:
Non-corrosive pump with polypropylene and Teflon wetted parts
All poly non-corrosive pneumatic tires
Stainless steel construction
Wall mount dilution dispensing station (to ensure accurate dilution of chemical)
25’ foaming hose and wand with shut off and 50’ of air hose
Portable Sanitizing Cart
This unit can be used with any sanitizer without the fear of chemical incompatibility. It comes complete with application hose and air hose.
Features include:
Chemical resistant pump
Stainless steel construction
All poly non-corrosive pneumatic tires
Wall mount dilution dispensing station (for proper dilution of registered sanitizers)
Safe-T-Dose 45
Reduce your exposure to hazardous chemicals and reduce the time to dose a tank for CIP with our Safe-T-Dose 45 Portable Chemical Dispensing system. Simply roll the Safe-T-Dose cart to the location of the tank to be cleaned, hook up the Tri Clover water line and open the flow valve. The water driven pump will draw the preset amount of chemical out of the concentrate drum and mix it to the correct level as it is discharged into the vessel to be processed.
Two Step Footwear Sanitizer
Our Two Step, Footwear Sanitizing system allows the worker to sanitize the bottoms of their footwear quickly and easily. There’s no need to install our system or provide any power source to operate. The worker simply steps onto the TWO STEP unit and positions their feet in the gridded openings. Once the worker has positioned their feet they simply push the button to apply a fog type mist to the bottoms of their footwear quickly sanitizing their soles. The 1 gallon F style jug attaches with Kleen Connect Safety Feeds making it easy to remove and carry to the location where the ready to use sanitizer is stored for refilling. The unit has sturdy wheels and the handle can be used to pull it around to any location for quick positioning or to clean out the reservoir.
- 1